Industrial Environmental Engineering
Effective January 1, 2025
This document outlines the key value drivers for manufacturing facilities seeking NRC-compliant cleanroom certification and advanced air filtration solutions. Each benefit below is tied to measurable outcomes in contamination control, regulatory alignment, and operational efficiency.
Our certification protocols align with CAN/CSA Z317.2 and NRC Canada guidelines, reducing re-certification cycles by up to 40%. Pre-audit support includes isokinetic probe placement and real-time data logging for both viable and non-viable particle counts.
Ceiling-mounted HEPA H14 units deliver 99.995% particle capture at 0.3 microns, meeting ISO Class 5 requirements for pharmaceutical and semiconductor cleanrooms. Tool-less filter replacement reduces downtime during routine maintenance.
Scalable pressurization modules maintain differential pressure cascades from 15 to 30 Pa, preventing cross-contamination between classified zones. BACnet and Modbus integration enables centralized monitoring and alarm management.
Six-isokinetic-probe array with adjustable flow rates (28.3–100 L/min) supports simultaneous viable and non-viable sampling in a single pass. Electropolished 316L stainless steel construction minimizes particle shedding and cross-contamination.
Our filtration and pressurization systems integrate with existing BMS via open protocols, reducing retrofit costs. Variable-speed drives on fan arrays lower annual energy consumption by 18–25% without compromising cleanroom classification.
Post-installation support includes quarterly performance reviews, filter replacement scheduling, and updated certification documentation. Our team provides direct liaison with NRC Canada auditors during regulatory inspections.
Visual reference
99.995% particle filtration at 0.3 microns, ISO Class 5 ready. Low-profile housing with tool-less filter replacement and optional UV-C sterilization module.
Maintains 15–30 Pa differential pressure cascades with BACnet/Modbus BMS integration. Redundant fans and VAV operation for GMP-compliant facilities.
Six 316L electropolished probes with adjustable 28.3–100 L/min flow rates. Simultaneous viable and non-viable sampling reduces certification downtime.
Our engineering team delivers NRC-aligned cleanroom certifications, HEPA/ULPA filtration retrofits, and differential pressure validation for pharmaceutical, semiconductor, and aerospace manufacturing facilities across Canada.
Full ISO 14644 classification and CAN/CSA Z317.2 certification for cleanrooms from ISO Class 3 to Class 8. Includes particle count mapping, airflow visualization, and recovery testing with NRC-traceable instruments.
Custom filter bank layouts for existing HVAC ductwork, including H14 and U15 grade filters with 99.995% efficiency at MPPS. Pre-filter stages and UV-C sterilization modules available for microbial control.
Commissioning and annual re-validation of pressure cascades from 15 to 30 Pa between classified zones. BACnet and Modbus integration for continuous BMS monitoring and alarm thresholds.
Active air sampling using isokinetic 316L stainless steel probes at 28.3–100 L/min. Single-pass collection for both microbial (TSA/RBA) and particulate (0.3–10 µm) counts, reducing certification downtime.
Scalable pressurization modules with redundant fans and variable air volume control. Suitable for multi-zone GMP facilities requiring fail-safe positive or negative pressure regimes.
All certification reports and system documentation structured per NRC Canada guidelines. Includes full traceability of calibration certificates, filter serial numbers, and pressure differential logs.
Explore our recommended products and articles for maintaining NRC-compliant manufacturing environments.